Toilet Flush Mechanism Buying Guide
Indispensable for any toilet, the Flush system makes the drainage of wastewater from the bowl possible. At the very least, a toilet will have an inlet valve, a float, and a Flush mechanism. Avoid leaks and follow our guide to help you choose your flush!
What is a Flush mechanism and how does it work?
A toilet Flush is a system that removes contaminated water from the bowl and replaces it with clean water.
Its basic effect depends on the brute force of a volume of water released from a storage tank. The water emission produces a stream that propels the waste and paper along the outflow pipe.
The toilet tank (or cistern) is connected to one end with an inlet valve and the other with the bowl. In the tank is also the centerpiece: the Flush mechanism that regulates inlet and exhaust in the system.
What are the different types of Flush mechanisms?
Today you only see Flush mechanisms with the tank directly connected to the bowl. Gone are the days when the tank hangs two feet above the bowl and is operated by pulling a chain! ...
On top of the tank, you will find the device to operate the Flush mechanism. There are three types: the pull, the single push button, and the double push button.
Flush mechanism: Pull or push a button?
Pull: Pulls vertically a metal rod opening the mechanism and let the water run out of the tank in the bowl. This system is obsolete because it does not limit the amount of water released from each operation.
One push button: a great technological advance that allows better control of the water emission. Possible to stop the flow of water when the bowl is emptied without having to wait until the tank is completely emptied.
Double push button: The king of the flush mechanisms, it consists of two knobs: one small and one large. Operating the small knob gives less water than operating the large. This allows you to save water naturally. Finally, it is not necessary to pour 12 liters of water into the drain to remove waste that can be washed off by six. You can even set the water volume to be released by the smaller button.
Maintenance and installation of your toilet flush mechanism
Keeping your Flush mechanism in good condition is a guarantee for the economy. Do not ignore a leak or malfunction mechanism because of your water bills. Most leaks are due to a damaged or sealed seal.
Clean your rinse mechanism regularly, especially if the water in your system is very calcareous. Lime attack builds on the compounds of the mechanism and can disrupt the positive seal between the tank and the bowl.
Flush mechanisms can be installed very easily; Children's play as long as you follow the installation instructions and ensure that the model you choose is suitable for your tank. Although many mechanisms are standard and can be adapted to any type of tank, you should always first perform a few measurements before you purchase a new rinse.
Last but not least, before any kind of disassembly, make sure to close the water supply!
If you want to know more information about flushing toilet, visit my review center .
If Interested in More Topics:
- Advantages of Greatest Flushing Toilet
- Better Lifestyles With Dual Flush Toilets
- Choosing The Best Toilet For Your Home
- How to Purchase Good Toilet Seat: Ultimate Guide
- Large and Small Toilets For Different Bathroom